10
/
16
2.4 Announcements of parallel connection before start-up
1. Install and pile the batteries correctly, and then turn the switch to ‘ON’ position, start up the
batteries. When the batteries are installed wrongly, it would lead to startup error. After starting up
the system normally, the batteries would distribute the address automatically. The main control
box at the top would judge through the data sent from the below batteries.If the data sent from the
batteries are judged to be normal, the batteries would be started up successfully, otherwise
startup would fail.
2. Shut down. When the battery is not charged or discharged, then you can shut down the battery.
The switch can be used to cut-off the circuit when the battery is powering the loads. But to protect
outer devices, we suggest to firstly shutdown the loads and stop charging/discharging and then
turn the switch to ‘Off’, and make sure that the indicators are OFF, so that the battery is shut
down.
