Serioux SRX-WR150WH, Руководство пользователя

Страница: 17 / 38

MTU: It means Max Transmit Unit for packet. When using slow links, large packets can
cause some delays thereby increasing lag and latency. The default value is 1500.
Auto Reconnection: this function is enabled by default.
5.2.2 LAN Interface
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design
of network structure is related to what type of public IP addresses coming from your ISP.
This page allows you to configure the parameters for LAN which connects to the LAN port
of your Access Point.
IP Address: This is the IP addresses to be represented by the LAN (including WLAN)
interface that is connected to the internal network. This IP will be used for the routing of the
internal network (it will be the Gateway IP for all the devices connected on the internal
network).
Subnet Mask: This is used to define the device IP classification for the chosen IP address
range. 255.255.255.0 is a typical netmask value for Class C networks which support IP
address range from 192.0.0.x to 223.255.255.x. Class C network netmask uses 24 bits to
identify the network and 8 bits to identify the host.
Domain Name: this is optional, by default, it is SERIOUX.
DNS Relay: you can choose to enable or disable this function. By default, it is Enable
selected.
LAN SPEED: choose the LAN data rate. This router supports 10M/100M/AUTO.
5.2.3 DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a local area network protocol. If you
choose this mode, you will get a dynamic IP address from your ISP automatically. DHCP
server means that all the computers connected to this router will get the IP address
dynamically.
5 1
SRX-WR150WH