Pen & Glasses holder
Diagram 3
(only available on Heavyweight
Table Model)
1. S Lift
2. Lift
2. Lift
the original
Standby Mode
The Classic Light is not designed to be
opened so please do not attempt to tamper
with it. It is normal to leave the light on
standby when not in use. When in standby
mode it will consume less than 0.5w.
Table Accessories
Heavyweight Table Lights are equipped with
pen and glasses holders. One or both of
these can be removed if you wish.
The Retaining Cap (1) is a friction fit and
releases if squeezed and lifted. If it seems
a little stiff, you can loosen it by gently
levering BOTH holders (2) on either side.
Once the Retaining Cap has been released,
remove one or both holders and then clip
the cap back into place (diagram 3).
