Beam width
Pen & Glasses holder
Diagram 3
Diagram 4
(only available on Heavyweight
Table Model)
1. S Lift
2. Lift
2. Lift
Adjustable beam width
Your light, Your way
Adjusting Your Beam
In addition, incorporating our very latest
LED light engine technology, the light head
can be adjusted independently to change the
beam width. By simply gently pulling the
bulb lens you can adjust the beam from a
wider area to a narrow, more concentrated
spot (diagram 3).
Plugs & Fuses
Your Alex Varifocus Light is equipped with
a 10ft cable and is fuse-protected at the plug
and internally. Your light is supplied with a
3 amp fuse which is located in the plug. Do
not replace with any higher rating of fuse.
Table Accessories
Heavyweight Table Lights are equipped with
pen and glasses holders. One or both of
these can be removed if you wish.
The Retaining Cap (1) is a friction fit and
releases if squeezed and lifted. If it seems
a little stiff, you can loosen it by gently
levering BOTH holders (2) on either side.
Once the Retaining Cap has been released,
remove one or both holders and then clip
the cap back into place (diagram 4).
60
