Seriallink SLK-R602 Series, Руководство пользователя

Страница: 18 / 29

18
/
29 18 / 29
SLK-R602 Series Industrial Cellular Router
Web
：
www.seriallink.net e ‐ Mail
：
info@seriallink.net Mobile Phone
：
+86 ‐ 18682315199
4. Special SIM card, fill in as required. We take the setting of telecom iot card as an
example:
4G: protocol and modem nodes. The service type is 4G only. The default remains
the same as long as you fill in the APN, username, password and dial according to
the form, and then click save the application.After the normal Internet access, as
shown in the figure below, there will be both sending and receiving metropolis
packets, and the operator will assign us an IP address of the 10-point network
segment.It means 4G is normal.
Domestic common 4G iot card APN setting method :(iot card must be set)
Operator APN user password Dial Number
China
Telecom IOT
card
ctm2m *.m 2m or
m2m )
vnet.mobi
vnet.mobi
*99#
*99#
China
Unicom IOT
Card
unim2m.njm2mapn *99#
General 4G card APN, generally can access the Internet without any Settings:
Sometime need setting as this form.
4G card APN
：
Operator
APN User Password Dial Number
China
Mobile
cmnet card card *99#
China
Unicom
3gnet card card *99#
China
Telecom
ctlte ctnet@mycdma.cn
or card
card *99#
Note:
APN is different in every country, and universal SIM CARDS do not require any Settings to
access the Internet, setting as your operator supplier.
Telecom and China unicom 3 g card for 3 g general card set method: deal with modem node to keep the
default, unicom, mobile 3 g service type selection "only" 3 g, 3 g telecommunications service type choose
CDMA/EVDO, APN, user name, password, dial according to the following form: if you buy is unicom 3 g or
telecom 3 g version of the keep the factory Settings, if it is 3 g network card or other special card
according to the SIM card can surf the Internet after suppliers required to fill in.