4
Water flow adjustor
Assembly
1.
Position on a flat, level surface.
2.
Connect the water tube to the water pump.
3.
Position the water pump inside the water reservoir, secure it to the base of the water
reservoir using the suckers to prevent the pump from moving around.
4.
Lower the top section into position. Put the included pebbles into the water reservoir.
5.
Fill the water reservoir with clean, cold tap water.
6.
Connect the pump cable to the adaptor plug then plug into a suitable power supply and
switch it on.
7.
Once the water starts flowing, add more water to the water reservoir as needed to ensure
that the water pump remains submerged.
8.
If you would like to adjust the flow of the water, turn the flow adjusting dial on the water
pump.
