4
LED light power cable
Water flow adjustor
Assembly
1.
Position on a flat, level surface.
2.
Feed the pipe connected to the top piece, down into the water tank, the top bowl will
then rest on the top of the water feature.
3.
Connect the LED light cable to the plug adaptor.
4.
Position the water pump inside the water reservoir, secure it to the base of the water
reservoir using the suckers to prevent the pump from moving around.
5.
Fill the water reservoir with clean, cold tap water, ensuring that the water pump is fully
submerged.
6.
Connect the pump cable to the adaptor plug then plug into a suitable power supply and
switch it on.
7.
Once the water starts flowing, add more water to the water reservoir as needed to ensure
that the water pump remains submerged.
8.
If you would like to adjust the flow of the water, turn the flow adjusting dial on the water
pump.
