Instructions for Safe Use and Maintenance of Mini Bike
WARNING: When turning on pavement,
loose gravel, or similar surfaces, there is an
increased risk in loss of control.
ALWAYS SLOW DOWN!
WARNING: ALWAYS SLOW DOWN when
turning.
High-speed turning can cause loss of control,
possible vehicle turn-over and/or possible
operator and/or passenger injury.
Turning on a slope increases the risk of
rollover.
Practice operation is required to coordinate
turning skill.
Failure to operate this Mini Bike at a safe
speed while turning can result in a strong
possibility of severe personal injury.
1. Mini Bike shall not be modified from the
manufacturer’s original design and configuration.
2. Mini Bike shall not be used to perform racing,
stunt riding, jumps, spin-outs, donuts or other
maneuvers as they may cause loss of control of
the Mini Bike or may cause uncontrolled operator
or Mini Bike actions or reactions, As such, these
activities are likely to result in possible injury to the
operator, bystanders or a combination thereof.
3. Prior to each cycle of operation, a supervisor
shall perform the preparation checks specified by
the manufacture, and further verify;
a. Smooth throttle operation and positive return of
the throttle linkage to a closed throttle position
when released;
b .The steering linkage is adjusted and operates
properly;
c. All guards and pads originally supplied by the
manufacturer are in proper place on the Mini Bike
and in serviceable condition;
d. The area where the Mini Bike is operated is
safe and suitable for Mini Bike operation;
f. The braking system on the Mini Bike is
functioning properly;
g. All safety labels are in place, legible and
understood by the operator.
h. Any and all axle guards, chain guards, or other
covers or guards supplied by the manufacturer are
in place and in serviceable condition;
i. Tires are in good condition, inflated property, and
have sufficient tread remaining.
j. All fasteners are in place and tightened securely.
4. Mini Bike motor shall not be started unless the
operator is seated in the proper position for Mini Bike
operations with the operator’s hands on the Handle
Bars and the brake fully engaged.
5. Long hair, loose clothes, or jewelry can get caught
in moving parts below the seat or surrounding
environment, Remove or the back anything loose
that can reach below or behind the seat before riding.
6. A supervisor shall verify personally that everyone
operating or riding is knowledgeable, capable, and
has the cognitive capacity to operate the Mini Bike
safely, including those items specified in 1 through 5.
a. The supervisor only shall allow the use and
operation of the Mini Bike after a demonstration that
each operator can understand and operate all
components of the Mini Bike prior to use.
b. The supervisor shall provide continuous
supervision during Mini Bike use.
c. The supervisor shall not allow anyone to ride in
or operate Mini Bike with long hair, loose clothes, or
jewelry which can get caught in moving parts
below the seat or tie back anything loose that can
reach below or behind the seat before riding.
8. Badger E 450 Mini Bike operators shall adhere to
all manufacturer’s recommendations and
instructions, as well as comply with all laws and
ordinances.
a. Operators shall stay seated with both hands on the
Handle Bars and both feet in the Mini Bike at all
times, whether moving or stationary, unless the Mini
Bike is stopped completely.
b. Shall observe minimum age restrictions
；
