www.SereneLifeHome.com
6
ASSEMBLY INSTRUCTION
STEP 1. FRAME ASSEMBLY
Lay out all Frame Tubes (#1) and Leg Tubes (#2) as shown. Insert the Leg Tubes into the sockets of the
Frame Tubes.
NOTE:
1. All parts with the same part number are interchangeable.
2. The side with holes on the Frame tubes (#1) should be facing upwards, in the following steps.
3. While inserting Leg tubes (#2) into Frame tubes (#1), ensure the screw holes on both parts align.
STEP 2. TRAMPOLINE MAT ASSEMBLY
•
When attaching Springs (#3) to Jumping mat (#4), please ask another person to help you with this.
•
Lay out the Jumping Mat (#4) inside the frame. The surface of the mat is smoother than the other side.
•
To make sure the tension on the mat balanced, please follow the instructions below to attach the springs.
•
Select an arbitrary point on Frame Tube (#1) and designate it as point 1. To hook the first Spring (#3),
attach one end to the triangle ring sewn on the Jumping Mat (#4) and the other end to point 1 on
Frame tube (#1) with Spring Loading Tool (#19).