SereneLife SLSFE18FP, Руководство пользователя

Страница: 3 / 6

3
!
!
!
!
NOTE: For security of your property, you will need to change the preset code.
PREPARATION
POWER SUPPLY
FINGERPRINT REGISTRATION
SET USER CODE
• The safe on delivery comes with no registered fingerprints.
• The safe is not loaded with batteries, you may insert the emergency key into the
emergency keyhole to open the door .
• Uncover the battery compartment cover at the back of door. And put in 4 X AA
batteries. Please pay attention to the polarity of the batteries. For normal use, the
batteries last up to one year.
• The preset code of safe on delivery is " 1234 ", the user may open the door with the
preset code when batteries are placed and tested normal.
• Pull the door open.
• Pull out the battery compartment cover.
• Replace 4 fresh batteries by lining them up in a manner as indicated by the " + " and
"-" signs.
NOTE: If the red light activates, it means the batteries are low. So you can plug
the emergency battery boxes into the jack to power. While choosing batteries,
it’s suggested to use high-powered, high quality alkaline batteries. Please do
not use any inferior, counterfeit or carbon-zinc batteries.
NOTE: A maximum of 20 fingerprints can be registered.
NOTE: Factory preset code is 1234.
• Press Initialization/Add key, and you’ll hear a short "Bleep, Bleep".
• Put your finger at finger collector screen where the red light is. You’’ll hear "Bleep,
Bleep" for two times.
• After about a second, a long "Bleep" follows a short one, which means that fingerprint
registration succeeded. (3 short "Bleep, Bleep, Bleep" means registration failed.)
• According to this method, you can register other fingerprints.
Press number key "1" for about 5 seconds, the green indicator light will turn on. Input
the current/original code and press the unlock key to confirm. After hearing a "Bleep",
input new code (4 to 8 digits) and press the unlock key. Input the code again, and
press the unlock key. Hearing a "Bleep" means the operation was successful.