www.SereneLifeHome.com
8
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE
WARNING:
To prevent electrical shock, please turn off and unplug the treadmill before cleaning or
performing routine maintenance.
WARNING:
Always check the wear and tear components like foot lock latch tube and running belt to
prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents.
Be careful not to get excessive moisture on the display panel as this might damage the unit and create an
electrical hazard. Please keep the treadmill, especially the computer console, out of direct sunlight to
prevent damage to the screen.
STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors.
Ensure the master power switch is off and the power cord is un-plugged from wall outlet.
TROUBLESHOOTING GUIDE
PROBLEM
Treadmill will not
start
POTENTIAL CAUSES
CORRECTIONS
1. Treadmill not plugged in.
2. Circuit breaker in the
house has been tripped.
3. Treadmill circuit breaker
has been tripped.
1. Plug the power cord into a wall outlet.
2. Reset the circuit breaker, or call an
electrician to replace the circuit breaker.
3. Wait 5 minutes and then try to restart
the treadmill.
Belt slips
Belt not tight enough
Adjust belt tension
Belt hesitates when
stepped on
1. Not enough lubrication
applied onto the running
deck.
2. Belt is too tight
1. Apply lubricant.
2. Adjust belt tension
Belt is not centred
Running belt tension not
even across the rear roller
Center the belt
