www.SereneLifeHome.com
7
OPERATING INSTRUCTIONS
WARNING:
FOR YOUR SAFETY
Before using this outdoor fire pit, make sure you have read, understood and
are following all information provided on page 1 of this manual. Failure to
follow those instructions can cause death, serious injury or property damage.
Lighting:
1. Make sure there is only a small amount of ash (1/2” thick) at the bottom of the
metal bowl.
2. Place a layer of dry kindling or a natural firestarter onto the center of the log rack.
3. Place above that layer the dry seasoned hardwood that is cut to lengths no
more than 12”.
4. Use a match to light kindling or firestarter.
5. Replace the safeguard spark screen when the kindling or firestarter is lit.
Tending the Fire
You may need to shift and/or add logs for an ideal experience.
Reminders:
•
Always wear protective gloves or a pot holder when tending a fire.
•
Wait until glowing wood have developed before adding any additional wood.
•
Do
NOT
add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or
enhance an existing fire.
1. Use the hook tool to carefully take away the spark screen.
2. Use the hook tool to shift the logs to allow additional airflow.
3. If additional wood is required, place wood on top of the burning log.
Be careful not to shift ashes.
4. Replace the safeguard spark screen.
Extinguishing
1. Allow fire to burn itself out.
2. Do
NOT
use water to extinguish as this is dangerous and can cause damage to
this outdoor fire pit.
