www.SereneLifeHome.com
9
FIG. 11
15. With the help of another adult, Attach the Backboard (#21) to the Board Tubes
(#1) using Bolts (#25), Washers (#22) and Nuts (#27) as shown in FIG.11 A.
At each bottom hole of the backboard, attach the ramp tabs of Ball Return with
Netting (#13) using Bolts (#25), Washers (#22) and Nuts (#27) as shown in FIG.11 B.
16. Insert the Lock Pins (#33) to the Left and Right L Tubes (#5 and #6) as shown in
FIG. 11 C.
FIG. 12
17. Connect the Sensor Wire of Switch Sensor to the Electronic Scorer (#14) as
shown in FIG. 12. Connect the Control Wire (#37) to the Electronic Scorer (#14)
as shown in FIG.12 and 12A.
.
14
37
FIG. 12
FIG. 12A
Sensor wire
Electronic Scorer
Sensor wire
Control Wire
ON/OFF
CONTROL
WIRE
VISIT
OR
25
22
27
22
Ramp Tab
Backside of
Backboard.
FIG. 11B
FIG. 11A
#33
Lock Pin
FIG.11C
12
13
