SereneLife PMTR16, Руководство пользователя, Страница: 2 / 4

INSTALLATION INSTRUCTIONS
•
Remove the equipment from the box.
•
Check that the lamps are secured on the special housings (hands protected with gloves or
insulating paper or cloth).
•
Prepare the positioning location.
•
Connect the power supply cable to the equipment.
•
Check that the cable is stretched to prevent people from stumbling or to prevent other
inconveniences.
•
Insert the cable plug into the power socket (protected by a circuit-breaker).
•
Check that all electric controls operate perfectly.
•
Activate the start control.
USE WARNINGS
•
If the equipment is placed outside, it must be covered and protected from bad weather.
•
Do not position the equipment near heat, gas or flammable product sources.
•
When the equipment is not used, disconnect the plug from the power socket (power off the
transformer and equipment power cable).
•
Position the equipment so it is not within easy reach of children and pets.
•
Before cleaning and/or servicing the equipment, turn off the switch and disconnect the power
cable plug from the power socket.
•
Check that the power socket for the power cable is protected by a circuit-breaker.
•
Ensure that the equipment positioning site is away from condensation points and water
splashes.
•
Do not start the equipment if the power cable or the power socket is damaged.
•
Do not force the protections while the equipment is operating.
•
In case of use of the power cable extension, ensure that the junction point is protected against
all possible negative effects (water,
tears, shocks, short-circuits, etc.)