Serene SLPLRCT16, Руководство пользователя

Страница: 19 / 24

19
www.SereneLife.com
GEN ERAL AQUAT I C SAFET Y
Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death.
To reduce your risk of injury, read and follow all product, package and package insert warnings and
instructions. Remember, however, that product warnings, instructions and safety guidelines cover
some common risks of water recreation, but do not cover all risks and dangers.
For additional safeguards, also familiarize yourself with the following general guidelines as well as
guidelines provided by nationally recognized Safety Organizations:
•
Demand constant supervision. A competent adult should be appointed as a “lifeguard” or water watcher,
especially when children are in and around the pool.
•
Learn to swim.
•
Take the time to learn CPR and first aid.
•
Instruct anyone who is supervising pool users about potential pool hazards and about the use of protective
devices such as locked doors, barriers, etc.
•
Instruct all pool users, including children what to do in case of an emergency.
•
Always use common sense and good judgement when enjoying any water activity.
•
Supervise, supervise, supervise
.
T ROU BLESH OOT I N G GU I DE
PROBLEM CAUSE SOLUTION
FILTER MOTOR
FAILS TO START
·
The motor is not plugged in
·
The GFCI/RCD circuit breaker is
tripped
·
Motor too hot and overload
protection is shut off.
·
Filter cord must be plugged into a 3 wire
outlet that is protected by a Class A Ground
Fault Circuit Interrupter, or RCD.
·
Reset circuit breaker. lf circuit breaker trips
repeatedly, your electrical system may have
a defect. Turn off circuit breaker and call an
electrician to correct the problem.
·
Let the motor cool down.
FILTER DOESN'T
CLEAN POOL
FILTER DOESN'T PUMP
WATER OR FLOW IS
VERY SLOW
·
Clogged inlet or discharge
·
An air leak on the intake line.
·
Scale or buildup on cartridge.
·
Excessively dirty pool.
·
Dirty filter cartridge.
·
The nozzle and strainer connection
are reversed.
·
Pool inlet air adaptor connected
to the wrong fitting.
·
Clear any obstructions in the intake hose
by discharging it inside pool wall.
·
Tighten hose clamps, check hoses for
damage, check pool water level.
·
Replace cartridge.
·
Clean cartridge more often.
·
Install the nozzle at the upper position of
the pool inlet, and the strainer at the lower
position of the pool outlet.
·
Make sure the pool inlet air adaptor is
connected to the pool inlet upper fitting.
·
Improper chlorine or pH levels
·
Filter cartridge is dirty
·
Damaged cartridge
·
Excessively dirty pool.
·
The strainer screen is restricting
the water flow.
·
Adjust the chlorine and pH level.
Consult your local swimming pool supply
stores.
·
Clean or replace cartridge.
·
Check the cartridge for holes.
Replace if damaged
·
Operate the filter for longer periods.
·
Clean the strainer screen at the inlet.