•6
•7
•7
For additional protection the installation of a residual current device
(RCD) is strongly recommended. ( Refer to local electrical regulations)
Remove all packaging e. material ( and check the appliance, supply cord and the plug
for signs of damage
Pay attention to the surface on which Apollo is going to be placed. Ensure that it is
suitable, flat, stable and strong enough to hold the appliance.
Before using ensure that the minimum safe distances from walls and solid objects are
strictly followed.
45mm
45mm
45mm
0.2m
0.5m
1.8mm
Installation
There must be a distance of at least 1.5 M at each side between the appliance and
walls or the like.
Assemble the appliance into the cage using mounting bracket located on the back of
the heater
Connect to a power source using the 4.5 meter ruberised cordset provided.
Observe whether during the first 10-15 minutes that the appliance is functioning
properly.
