6
2. “
SPEED
” BUTTON:
The fan speed of the unit can be adjusted when the unit is in operation (L/I M/II
H/III). Each time that you press on the (SPEED) button, the speed is adjusted from L
(low) to M (medium) to H (high).
3. “
TIMER
” BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected operating
time has elapsed.
2) Press this button (Timer) to select the required operating time. A warning light
automatically indicates the remaining operating time.
3) To select the continuous operating mode, press the button repeatedly until there
are no more indicator lights lit up.
Important note
: When the unit is not in use, switch it off and unplug it.
INSTALLING & REMOVING
FILTERS
FILTER REPLACE INDICATOR
The POWER light will flashing continuously in GREEN indicating that it is time to
replace the filter. Replace the filter according to the directions then press the
POWER/UV-C button and hold for 5 seconds to restart the system. The light will stop
flashing.
*Combination Filter will last approximately 6 months.
1.
Open the front cover from the top.
2.
Remove the combination filter by pull the two strips.
Extra Pre-filter
