Page 4
Heating panel
Installation:
This appliance must be installed in accordance with the current electrical
wiring rules and regulations. The heater must not be located immediately
below a socket-outlet. A suitable disconnection device (acting in all active
supplies) is required to be incorporated in the fixed supply wiring.
When used as a bathroom, the heater must be installed such that the controls
cannot be touched by a person in the bath or shower.
The minimum required distance from the heater to any floor is 150mm.
The minimum required distance from the heater to any adjacent wall is
200mm.
Connection Details:
The heater is supplied with a flex and 3 pin plug. For single operation the
heater can be plugged directly into a socket outlet or hard wired.
For permanent connection to fixed wiring, the plug must be removed.
