Introduction
Serenity Heating Panels
Serenity S2020 and 2021 Convection Heating Panels are available as 1000 Watt and 2000 Watt
models providing you with the opportunity to choose a model that will optimise the available wall
space and room size.
Our new designs have passed rigorous testing and quality assurance controls with both style and
safety in mind. As a result, they have a slim profile, are double insulated, include auto reset
overheat protection and are supplied with wall mounting brackets for simple installation.
These Serenity convection Heating Panels with easy to use top mounted controls feature:
•
Fully adjustable thermostat control.
•
Simple to use 2 level heat control.
SAFETY CUT-OUT:
Serene Convection heating panels are fitted with an auto-reset thermal cut-out.
This safety device will automatically switch off the elements should the heater reach an abnormal
temperature.
Should this occur: switch off the heater immediately and allow the heater to cool-down.
Overheating is normally caused by blockage of the air vents or by the vents being covered.
NEVER COVER THE HEATING PANEL OR ANY OF THE VENTS.
To clean the vents use a vacuum cleaner as necessary.
CONNECTION DETAILS:
The heater is supplied with a flex and 3 pin plug. For single operation the heater can be plugged
directly into a socket outlet.
For permanent connection to fixed wiring, the plug (if fitted) must be removed wire must be
connected to a potential free terminal in a switched permanent connection unit.
INSTALLATION:
This appliance must be installed in accordance with the current electrical wiring rules and
regulations.
The heater must not be located immediately below a socket-outlet. A suitable disconnection
device
(acting in all active supplies) is required to be incorporated in the fixed supply wiring.
When used as a bathroom, the heater must be installed such that the controls cannot be touched
by a person in the bath or shower.
IP rating IP24
The minimum required distance from the heater to any floor is 150mm. The minimum required
distance from the heater to any adjacent wall is 200mm.
