Basic Operation
RoboSHOOT
+
©
User Manual Page 6
Flash Test / Modeling Light
To Test fire each TTL speedlight ½ click (hold on MX-
15
+
) the top button for Flash Test or ½ hold the
button to briefly activate the Modeling Light (MX-
20
+
) if your compatible flash is so equipped.
Top Button configuration for the MX-20
+
can be
changed via Flash Group Settings while connected
to the unit. The unit will respond according to last
programmed settings.
Flash Exposure Lock
Flash Exposure Lock (FEL) is engaged by fully clicking
the top button. If an exposure was previously taken,
the reference power may be already available for
use. Otherwise, the next exposure will be used for
the reference. If a camera mode change occurs
(exposure mode, aperture, ISO, etc), the reference
will remain active and set using prior exposure
values. This allows for more creativity. If you wish to
compensate you can use flash exposure
compensation (TTL Offset).
Exit FEL by clicking the side button or turning the
camera off/on.
Содержание RoboSHOOT MX-15
Страница 1: ...RoboSHOOT X Series USER MANUAL addendum ...