Sercomm RP052M, Руководство пользователя

Страница: 10 / 14

8
WPS onboarding for deploying mesh network
In this section, we will guide user how to perform WPS onboarding to establish connection
between Controller and another WiFi EasyMesh Router(we will call this devic “Agent” in later
section) to deploy mesh network.
Below are steps to deploy mesh network.

Press WPS button on both Controller and Agent for about 4~5 seconds and then release.

Once WPS onboarding process is triggered, the WiFi LED will blink until the process is
completed.

After finishing WPS onboarding process, you will find the Agent is connected to the
Controller in network topology.

User can repeat the same steps to add more Agents in mesh network to extend WiFi
coverage.