3
LAN port
Use the provided RJ-45 USB cable to connect your WiFi IP Camera
to a 10/100BaseT hub or switch.
Note:
Plugging in the RJ-45 USB cable will disable the Wireless
interface. Only 1 interface can be active at any time.
The RJ-45 USB cable should only be connected or disconnected
when the camera is powered OFF. Attaching or detaching the
RJ-45 USB cable while the camera is powered on does NOT
switch the interface between wired and wireless.
WPS/Reset Button
Push the WPS button on the device and on your other wireless
device to perform WPS function that easily creates an encryption-
secured wireless connection automatically.
WPS PBC Mode
. When pressed and released (less then 3
seconds), the WiFi IP Camera will be in the WPS PBC mode
(Auto link mode).
WPS Pin Code Mode
. When pressed and held for over 3
seconds, the WiFi IP Camera will be in the WPS Pin Code
mode.
Reset to manufacturer default valued and reboot
. When
pressed and held over 10 seconds, the settings of WiFi IP
Camera will be set to their default values.
DC Power Input
Connect the supplied 12V power adapter here. Do not use other
power adapters; doing so may damage the camera.
Power LED
Network/WPS LED
