
5
Network LED
(Green, Amber)
On (Green)
- Wireless or LAN connection is available.
Off
- Wireless or LAN is not connected or camera is not
sending/receiving data.
Blinking
(Green)
- Data is being transmitted or received via the
LAN or Wireless connection.
On (Amber)
- If the LED is on, the WPS is not processing
successfully.
Blinking
(Amber)
- WPS function is being processed.
Rear - Network Camera
Figure 3: Rear Panel
Antenna
Attach the supplied antenna here. The antenna is adjustable; best
results are usually obtained with the antenna positioned vertically.
Speaker out
If required, an external speaker can be plugged in here.
Power Input
Connect the supplied 12V power adapter here. Do not use other
power adapters; doing so may damage the camera.
LAN port
Use a standard LAN cable to connect your Network Camera to a
10/100BaseT hub or switch.
Note:
•
Plugging in the LAN cable will disable the Wireless interface.
Only 1 interface can be active at any time.
•
The LAN cable should only be connected or disconnected when
the camera is powered OFF. Attaching or detaching the LAN
cable while the camera is powered on does NOT switch the
interface between wired and wireless.
WPS Button
(Wireless Model
Only)
Push the WPS button on the device and on your other wireless
device to perform WPS function that easily creates an encryption-
secured wireless connection automatically.
•
WPS PBC Mode
. When pressed and released (less then 3
seconds), the Network Camera will be in the WPS PBC mode
(Auto link mode).