Sercel GRC DATA PRO, Руководство по эксплуатации, Страница: 29 / 93

Data Pro P/N 10029355 Rev AE
Operation Manual Page 29 of 92
Menu

Peripherals

Relay#1

Set Threshold (Numbered from 1 to 10)

Edit

Select
Threshold Condition Type

OK

Select Sensor to Use

Enter Threshold limit

Save

Enter Delay

Save
Figure 22
– Relay Configuration
To disable the
‘
Alarm
’
condition select the
‘Threshold Disabled/off’
button via Menu

Peripherals

Relay#1

Edit

Threshold Disabled/off ( Figure 23 ). The relay resets automatically once the channel
reading is below the set-threshold value if the user selects
‘Auto Reset’
in the threshold type while
setting up the relay configuration.
Figure 23
– Different Relay Reset Configurations
The relays reset manually by following below menu steps:
Main Menu

Peripherals

Relay#1 (or Relay#2)

Reset