Serai MT/BZERO, Руководство пользователя

Страница: 2 / 12

1A - WARNINGS
1B - TECHNICAL DATA
1 - GENERAL DESCRI PT ION
Before proceeding with the installation check that all the safety conditions are observeded in full compliance with laws
rules and regulations. Unfulfilment of the below listed directions will release the SERAI srl, from any responsibility for
damage caused to people or things.
- When opening the packaging, verify the integrity of all the product parts.
- In case of functioning anomalies, power off immediately the operator, disconnect it from all power sources and manually
operate the gate until the failure has been individuated and repaired by qualified personnel.
- Do not modify the product in any part, follow the instruction manual indications.
- Dismantling an repairing of the unit is allowed exclusively to authorized and qualified personnel.
- Avoid to install the operator close to direct heating sources or in contact with liquid substances.
- Wire the operator to the automation system with the appropriate power supply cables (3 wires cable, min. 0.75mm
2
) .
- To optimize the functioning of the automation, use only SERAI accessories.
- Installing, testing and first functioning have to observe the laws in force.
- Disposal of waste material has to observe local regulations.
- The gear-motor doesn’t require any particular maintenance because it is provided with a permament lubrification system.
Operator supply
7ED
24
Power
8
80
Speed
NT Ÿ
Travel
NN
Protection degree
*1 44
Operator weight
LH
6
Max. lenght of the leaf
N
Max. weight of the leaf
LH
Work cycle 50
NN
100x104x780 Operator dimensions
Working temperature
¡$
-20 ÷ +50
200
DAL
1965