Sequoia SAS16, Руководство по эксплуатации

Страница: 30 / 44

30
TROUBLESHOOTING
Troubleshooting
Attention: the sprayer shall only be repaired by a service centre.
Self-repair by the user is prohibited.
Trouble Possible Causes Recommendations
The pump does not work after switching on
No contact with the battery Contact the service centre
The battery is discharged Charge the battery
The pump is overheated Let the pump cool down
Faulty power switch Contact the service centre
The spray nozzle does not pass liquid or does
not spray properly
Dirty nozzle Clean nozzle
Air in the hose Check the tightness of the hose, remove the air
The pump is clogged Contact the service centre
Hose leakage Replace the hose
Damaged nozzle thread Replace nozzle
Low productivity and pressure
The suction filter is clogged Clean the filter
Not enough power Charge the battery
Liquid leakage
Leaky connection Make sure the connection is tight
The seal ring is damaged Contact the service centre
Damaged hose Contact the service centre
The battery does not charge
Water got into the connector Dry the connector
Faulty battery Contact the service centre