Sequid DTDR-65 Скачать руководство пользователя страница 28

Страница: 28 / 111

modified by Sequid staff only.

•

Please note:

generally the advanced tab is password protected. After

program installation the password is empty. Once the password is

given correctly, the protection is turned off until the Seunis program

is closed. Use the ALT-P shortcut to reactivate it immediately. In case

you have lost your password please contact

[email protected]

3.6 Software Operation Modes

The software provides three different operation modes; sample list mode

(default), macro mode and quick mode. Each of these modes can be se-

lected via the corresponding toolbar icons shown below:

Sample List Operation Mode

Macro Operation Mode

Quick Operation Mode

3.6.1 Sample List Operation Mode

The sample-list mode is the default operation mode. It is activated on pro-

gram startup and/or by clicking the sample list tool in the toolbar. The func-

tionality was already described in section

3.6.1

. Furthermore measurements

made in macro operation mode (section

3.6.2

) can be edited in this mode

after exiting the macro operation mode.

3.6.2 Macro Operation Mode

In case the same sequence of measurements (optionally with different mea-

surement modes or different impedance settings) has to be repeated over

and over again, the macro mode can be used. Activate this operation mode

by clicking the macro mode item in the toolbar.

Содержание DTDR-65
















































































































Результаты поиска

Содержание DTDR-65

Отзывы:

Sequid DTDR-65, Руководство по эксплуатации, Страница: 28 / 111

Результаты поиска

Содержание DTDR-65

Отзывы: