Sequential PRO 3, Руководство пользователя

Страница: 66 / 168

54 Arpeggiator Sequential
Effect Type Param 1 Param 2 Param 3
stereo delay delay time feedback amount low-pass filter cutoff
BBD delay delay time feedback amount low-pass filter cutoff
chorus depth rate low-pass filter cutoff
flanger depth rate feedback
phaser depth rate feedback
high-pass filter frequency resonance
ring mod frequency track shape
rotating speaker drive speed mic distance
super plate reverb time tone pre-delay
To recreate a classic time-shifting effect on the stereo or BBD delay, try adjust-
ing the delay time parameter in real time. You can also route an LFO or envelope to
the delay’s Time parameter using the modulation matrix.
Arpeggiator
The Arpeggiator allows you to hold a chord and the synthesizer will play
a pattern based on the individual notes held. You can adjust the playback
mode (up, down, up+down, random, assign.), the octave range (1, 2,
or 3), the number of repeats per note, and the tempo. The Arpeggiator
usually works best on sounds with a fast attack.
While you hold down a chord, pressing any additional notes will add
those notes to the arpeggio. You can change chords and notes and the
arpeggio will continue to play as long as at least one note is always held.
You can also use the
hold
feature with the Arpeggiator. When you enable
hold
, you can release the notes on the keyboard and the arpeggio will
continue to play — with any additional notes that you play added to the
arpeggio.
To prevent the Arpeggiator from adding new notes to an arpeggio when keys
are continuously held (and instead start a new arpeggio each time you change notes),
turn arp relatch
on
in the Arpeggiator. To do this, press the Arpeggiator’s
on
/
off
button
and turn Soft Knob 3 to turn arp relatch on in the display.