SEP
120
/
360
/
900/1250 D
www.sepura-technologies.com
t:
+44 (0)1543 379212
e:
2
3
4
Fit the inlet block to your chosen side using the screws
provided. (Extra blocks can be purchased if required.)
Completed
SEP 120 D
SEP 360 D
SEP 900 D
SEP 1250 D
Units
Insert the large blanking plug into the
remaining unused port block located on the
opposite side of the unit.
Insert the SILEXA
™
Carbon filter bag (white netting
with tied top) pushing it gently but firmly down to
the base of the unit.
Insert the second filter bag (needle-felt bag with
the pipe inlet hole on the top) and rest it on top of
the SILEXA
™
Carbon filter bag.
Press one of the black pipes into the hole in the top
of the filter bag and adjust the height to suit.
Screw the inlet connector (Reducing Bush)
into place tightly.
Connect the filter tube to
the inlet block using the fittings supplied.
Attach the twist off Grab Tap to the test point.
Attach your outlet hose to the nipple above.
Fill unit with water and check for leaks
.
For information on the
correct positioning and
installation of your
Sepura Separator
Unit please see the
accompanying leaflet.
Assemble and attach the service life indicator to the
lid of the unit using the pre-drilled hole.
See overleaf for more detail.
5
6
7
8
9
10
