SEP
120
/
360
/
900
ST
www.sepura-technologies.com
t:
+44 (0)1543 379212
e:
2
3
4
Fit the inlet block to your chosen side using the screws
provided. (Extra blocks can be purchased if required.)
Completed
SEP 120 ST
SEP 360 ST
SEP 900 ST
Units
Insert the large blanking plug into the
remaining unused port block located on the
opposite side of the unit.
Insert the SILEXA
™
filter bag (white netting with
tied top) pushing it gently but firmly down to the
base of the unit.
Insert the metal retainer(s) with bent ends facing
upwards. Slide down until it touches the top of the
filter bag. DO NOT compress the filter bag.
Insert the second filter bag (needle-felt bag with black
inlet tube) and rest it on top of the retainers.
Screw the inlet connector (Reducing Bush)
into place tightly.
Connect the filter tube to
the inlet block using the fittings supplied.
Attach the twist off Grab Tap to the test point.
Attach your outlet hose to the nipple above.
Fill unit with water and check for leaks
.
For information on the
correct positioning and
installation of your
Sepura Separator
Unit please see the
accompanying leaflet.
Assemble and attach the service life indicator to the
lid of the unit using the pre-drilled hole.
See overleaf for more detail.
5
6
7
8
9
10
