DMR Repeater SBR8000, SCR8000, SER8000
10
Hold the bracket securely, keeping it level. Secure into
position using the ST6 x 35 expansion screws. Ensure that
the bracket is secure and level.
Remove the desk mount feet (if fitted) from the repeater.
With the top of the repeater against the wall, slide the
repeater into the bracket.
Secure the repeater to the wall bracket using the four M5 x 12
screws as shown.
Attaching the desk mount feet
If the repeater is installed onto a desk or bench, the four screw
type desk mount feet, supplied with the product, should be
attached.
Using a soft cloth or rubber mat to protect the external surfaces,
place the repeater with the underside facing upwards, onto a flat
surface.
Secure the feet into position using the screws supplied.
