SEPTENTRIO PolaRx5S, Руководство пользователя

Страница: 87 / 107

8.4. HOW TO SET THE POLARX5S TO I TS DEFAULT CONF I GURAT I ON
8.4 How to set the PolaRx5S to its default
configuration
You can set the PolaRx5S con fi guration to its default settings on the Con fi gurations window
of the Admin menu as shown in Figure 8-7. Select ‘ RxDefault ’ from the ‘ Source ’ drop-down
list and either ‘ Current ’ or ‘ Boot ’ in the ‘ Target ’ menu. You will then be prompted to Save the
new current con fi guration as the boot con fi guration so the receiver will boot up with saved
con fi guration after a power cycle.
Figure 8-7: Setting the PolaRx5S to its default con fi guration
8.5 How to reset the PolaRx5S
I f the PolaRx5S is not operating as expected, a simple reset may resolve matters. The
PolaRx5S can be fully power-cycled by disconnecting then reconnecting the power supply.
However, on the Admin/Reset window as shown in Figure 8-8 di
ff erent functionalities can
be reset individually. A ‘ Soft ’ level reset will cause the PolaRx5S to boot up with its current
con fi guration while a ‘ Hard ’ reset will use the con fi guration stored in the boot fi le.
Figure 8-8: Resetting the PolaRx5S con fi guration to its boot con fi guration using a
Hard reset
87