SEPTENTRIO PolaRx5S, Руководство пользователя

Страница: 75 / 107

6.6. SCHEDULED SLEEP
Step 4: Choose when the schedule should start
Finally, de fi ne a time in the Schedule Start fi eld to choose when you want the Wake-Up
Schedule to start taking e ff ect. This e ff ectively corresponds to the fi rst time the receiver
will attempt to wake up from standby mode for the period of time de fi ned in the âĂ Ÿ Awake
DurationâĂ Ź fi eld.
Step 5: Save the configuration
After pressing âĂ Ÿ OkâĂ Ź to apply the changes, the receiver will suggest to copy the current
con fi guration to boot. This is because when waking up from standby or sleep, the receiver
will apply the boot con fi guration which at this point does not contain the recently con fi gured
changes (Figure 6-18).
Figure 6-18: Upon applying the changes, the receiver will show a warning
suggesting to copy the current con fi guration to boot
Note that you can also con fi gure the receiver to wake up at a certain point in the future and
then just stay awake. To do this, simply leave both the Awake duration and Repetition Period
options at their default setting and de
fi ne when the receiver should wake up by choosing an
appropriate Start Schedule time as shown in Figure 6-19.
75