SEPTENTRIO AsteRx-U3, Руководство пользователя

Страница: 72 / 83

7.5. HOW TO SET THE ASTERX-U3 TO ITS DEFAULT CONFIGURATION
7.5 How to set the AsteRx-U3 to its default
con fi guration
You can set the AsteRx-U3 con fi guration to its default settings via the Admin Con fi gurations
tab as shown in Figure 7-8. Select ‘ RxDefault ’ from the ‘ Source ’ drop-down list and either
‘ Current ’ or ‘ Boot ’ in the ‘ Target ’ menu. You will then be prompted to Save or Ignore the new
current con fi guration as the boot con fi guration.
Figure 7-8: Setting the AsteRx-U3 to the default con fi guration
Please note that this procedure will not erase the IP settings of the receiver. This can only be
done on the
Ethernet page of the Communication menu.
7.6 How to reset the AsteRx-U3
If the AsteRx-U3 is not operating as expected, a simple reset may resolve matters. Via the
Admin > Reset tab as shown in Figure 7-9, different functionalities can be individually reset.
A
‘ Soft ’ level reset will cause the AsteRx-U3 to boot up with its current con fi guration while a
‘ hard ’ reset will use the con fi guration stored in the boot fi le.
Figure 7-9: Resetting the AsteRx-U3 con fi guration to its boot con fi guration
72