SEPTENTRIO AsteRx-U MARINE Fg, Руководство пользователя

Страница: 77 / 89

7.5. HOW TO SET THE ASTERX-U MARINE FG TO ITS DEFAULT CONFIGURATION
7.5 How to set the AsteRx-U MARINE Fg to its
default con fi guration
You can set the AsteRx-U MARINE Fg con fi guration to its default settings via the Admin
Con fi gurations tab as shown in Figure 7-8. Select ‘ RxDefault ’ from the ‘ Source ’ drop-down
list and either ‘ Current ’ or ‘ Boot ’ in the ‘ Target ’ menu. You will then be prompted to Save or
Ignore the new current con fi guration as the boot con fi guration.
Figure 7-8: Setting the AsteRx-U MARINE Fg to the default con fi guration
Please note that this procedure will not erase the IP settings of the receiver. This can only be
done on the
Ethernet page of the Communication menu.
7.6 How to reset the AsteRx-U MARINE Fg
If the AsteRx-U MARINE Fg is not operating as expected, a simple reset may resolve matters.
The AsteRx-U MARINE Fg can be fully power-cycled using the front-panel power button
however, via the Admin Reset tab as shown in Figure 7-9, different functionalities can be
individually reset. A
‘ Soft ’ level reset will cause the AsteRx-U MARINE Fg to boot up with its
current con fi guration while a ‘ hard ’ reset will use the con fi guration stored in the boot fi le.
Figure 7-9: Resetting the AsteRx-U MARINE Fg con fi guration to its boot
con fi guration
77