Sepson FORCEMATIC Скачать руководство пользователя страница 61

Страница: 61 / 91

WORLD CLASS WINCHES

RELIABLE - DEPENDABLE - UNCOMPLICATED

With heavy loads, always work with the bottom wire rope layer on the drum to avoid

loaded rope pushing onto underlying rope layers and causing damage.
Never overload the wire rope. The minimum breaking load applies only to a new

and unused rope and remember also that the securing devices may not be

designed to withstand the maximum pulling power of the winch.

Operating instructions

15°

Never pull at an angle of more than 15 degrees on either side of the drum. Place

the winch in a straight line in front of the load if possible or use snatch blocks. Also

always use snatch blocks if you are not certain about the weight of the load about

to be pulled. This will reduce the pulling force and enable a better control of the

operation.

If a bigger angle than 15% is required use a rope sheave or a snatch block.

Содержание FORCEMATIC




























































































Результаты поиска

Содержание FORCEMATIC

Отзывы:

Sepson FORCEMATIC, Руководство пользователя, Страница: 61 / 91

Результаты поиска

Содержание FORCEMATIC

Отзывы: