Soluciones y Tecnologías de Control Embebido S.A.P.I. de C.V.
www.sepradel.com [email protected] +52 1 833-389-4054
14
time between pulse and pulse of the input packet could be random, as it happens in some
multipulse lasers with saturable passive type optical switch (Q-Switch passive). Then, to obtain a
synchronism always with respect to the same pulse different from the first, the input pulses must
be counted and only with respect to the desired pulse emit the delays, thus respecting better
synchronization than that possible to maintain only with respect to the first detected pulse
.
Fig. 13. Numeric keypad Modifying the number of pulses to count on input IN
The numerical keyboard of the previous figure allows deleting the current value using the
"Delete" or "DEL" button and with the rest of the keyboard inserting a new value. To finish editing,
press the "OK" button and return to the starting window to continue editing other values. The
following figure shows the pulse counter once modified from the numeric keypad.
Fig. 14. Pulse counter enabled for 20 rising edges, the pause time before counting again 1us input pulses
When finished editing the input channel parameters, you must press the "APPLY" button so
that they are applied and loaded into the unit's memory. You can then return to the home screen
(Fig. 10 on page 11) by pressing the "HOME" button.
5
Patent pending, file Mx / a / 2018/014622.
