background image

As per 06/2016

5

Mechanical movement

  

 

 

Self-starting product

 

 

When voltage is applied, the motor restarts automatically after a power

 

 

 failure or after eliminating the blocking. Do not stand in the danger

 

 

zone of the product. Always switch off the mains voltage when working

 

 

on the product and secure against switching on again.

 
 

 

Rotating impeller

 

 

Risk of injury to parts of the body that come into contact with the

 

 

impeller. Before starting the product, ensure that it is fixed securely and

 

 

the protection guards are in place.

 
 

 

Parts transported by the airflow

 

 

The product can transport small parts in the airflow and catapult them

 

 

out. Ensure that there are no loose small parts in the intake and 

 

 

exhaust area. Do not stand in the danger zone of the product.

 
 

 

Rotating fan

 

 

Long hair, loose-fitting garments and jewellery can be caught and

 

 

pulled into the product. This can result in injuries. 

 

 

Do not wear loosefitting garments or jewellery when working on 

 

 

moving parts. Protect long hair by wearing a hair net.

GmbH

DANGER

!

DANGER

!

WARNING

!

WARNING

!

Содержание MEB50E-05













Отзывы: