SEOWON INTECH SWC-3x00, Руководство пользователя

Страница: 22 / 29

Select “Admin” → “Reboot” from the menu.
Select “Reboot” to reboot the CPE.
Check “Reboot” checkbox to reboot the CPE and initialize CPE configuration.
To reboot the CPE, click “Apply”.
The CPE is rebooted automatically. This takes about 40 seconds.
For making a factory default, select “Reset to all default settings(It will be reboot)”
CPE Setup on the web page
Admin (Reboot/Default Setting)
This will take several minutes, and time will vary according to the environment.
In some case, a pop-up window asking to rebuild the system will be opened due to a version
difference. If this occurs, click “Yes” to rebuild the system.
CPE is rebooted automatically after the upgrade process is complete.
To avoid failure of the CPE, do not power off the CPE during the upgrading
process.
Caution
22