SEOWON INTECH SWC-1104, Руководство пользователя

Страница: 17 / 74

17
3.1 Windows 98/ME Setup
Select LAN card adapter used by connecting the router from the winipcfg IP Configuration window (Select NDIS
5.0 or the appropriate LAN card. Do not select PPP adapter) to check if the IP address of your PC is assigned to
the value between 192.168.1.10 and 192.168.1.60 automatically. If you cannot see other LAN card than PPP
adapter being used, you have to reinstall a LAN card driver. (Select LAN Card, click
“ Disconnect ” and then “ All
Create ” or “ All Update ” button to check IP assignment.)
[Note] All PCs connected to MULTI USER CPE will get each of assigned IP addresses respectively.
00-52-00-01-19-A2
192.168.1.10
255.255.255.0
192.168.1.1
Select
Select LAN Card: Select NDIS 5.0 or the appropriate LAN card
Adapter Address: Different values on each adapter, ignorable
IP Address: 192.168.1.10 ~ 192.168.1.60
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
[Note] If the IP address of PC is not assigned automatically, check the following and restart PC to check if the IP
address is assigned.
- Connect a LAN cable between PC and
MULTI USER CPE
- Check TCP/IP setup details
To use Internet after completion of PC setup, refer to Chapter IV and set the WAN port of MULTI USER CPE to
connect to the Internet. Since Internet connection setup is made by
MULTI USER CPE , you don ’ t need to set up in
all PCs but do just once.
< Check IP Address >