SEON Trooper TR4, Инструкция по установке и эксплуатации

Страница: 53 / 90

Configuring the DVR
700-0035 R004 3–19
3.2.6. Using the Network Settings Menu
The TR4 Plus DVR has a built-in network interface for connecting to an office
network or to certain peripheral devices.
To view the Network Settings menu:
1. On the main menu, press the
CH
3/Up arrow or
CH
4/Down arrow button to
highlight the setting you want to change.
2. Press the
ENTER
button. Figure 3-11 appears.
Figure 3-11 Network Settings menu
Table 3-13
Network setting configuration items
Menu Item Description Values Default
IP ADDRESS
For the IP address, enter a static IP address for the DVR. Make
sure this address is not used by any other device on the
network. If there is a DHCP server on the network, make sure
the DVR IP address is not in the IP address range assigned by
the DCHC server. 192.168.010.010
NETMASK
Enter the subnet mask for the network (usually
255.255.255.0). 255.255.255.0
GATEWAY
Enter the IP address of the router or gateway on the LAN. 192.168.010.001
MAC ADDR
The MAC address is fixed in the DVR and corresponds to the
unique ID of the internal Ethernet controller. Not configurable