Hard-drive lock
Hard-drive
power indicator
Hard-drive
access indicator
Removable hard-drive
Remote
control
receiver
Compact Flash
(CF) card slot
Video output jack
Temporary
power button
STOP
SEARCH
MENU
RECORD
PAUSE
PLAY
REV.PLAY
DVR Operation
(Programming)
ALARM
COPY
DISPLAY
ENTER
indicator
Arrow buttons (
)
button
button
button
Hard-drive access indicator
Hard-drive lock
Hard-drive power indicator
- This indicator turns on when the external alarm switch is closed. It
remains on for the programmed duration of the alarm.
- Use the
buttons to select a menu item. Use the
- Press this button to transfer audio and video information
to a CF memory card. Read the
for detailed
instructions.
- Press this button to display four different levels of additional video
information including date and time, title, recording
playback and recording
speed,
disk usage.
- While programming the DVR or searching for video, press this button
to accept a menu or search selection.
- This indicator is on when the DVR is accessing the hard-
drive. Do not remove the hard-drive while this indicator is on.
- Use a key to unlock the hard-drive before attempting to pull the hard-
drive out of the DVR. Do not unlock the hard-drive while the hard-drive access
indicator is on.
- This indicator is on when the hard-drive is properly
installed and locked.
ðï
ñ
ò
ð
ï
and
and
buttons to change the value of a menu item.
- Press this button to silence and disable the alarm buzzer. Press the
button again to enable the alarm buzzer (indicator on).
- The DVR can save audio and video information
to a removable Compact Flash (CF) memory card. The DVR system software can
also be updated from a CF card.
quality,
and
ñò
BUZZER
button
Compact Flash (CF) card slot
TR-CFR Installation and User’s Guide
JOG
LOCK
MENU
PLAY
POWER
REC
wheel
button
button
button
indicator
button
Remote control receiver
Removable hard-drive
- While the DVR is paused, turn the
wheel clockwise to advance one
video frame or counter-clockwise to go back one frame. During DVR programming,
the
wheel can also be used to quickly change menu values or title characters.
- The DVR buttons can be password protected. To unlock them, press the
button for 5 seconds, then enter the 6-digit password number using the eight
buttons from
(1) to
(8) on the bottom row of DVR buttons.
- While the DVR is stopped, press this button to start programming the
DVR. During programming, press this button to go back to a previous menu. From
the Main Menu press this button to stop programming and resume normal DVR
operation.
Use the
wheel to
control playback speed and direction.
- While the DVR is not recording, press this button to playback recorded
audio and video. Use the
wheel to control playback speed and direction.
- This indicator is on when DVR power is on.
- While the DVR is stopped, press this button to start recording audio and
video information.
- The DVR can be operated from an optional, infrared remote
control when the control is pointed at this receiver.
- The DVR’s hard-drive can be removed and replaced while DVR
power is on, but the DVR must be stopped or paused and the hard-drive access
indicator must be off.
JOG
JOG
LOCK
REC
DISPLAY
SHUTTLE
SHUTTLE
PAUSE
button
- Press this button to pause video playback and display a still frame. Use
the
wheel to display the next or previous still frames.
JOG
REV
.
PLAY
SHUTTLE
STOP
button
wheel
/
/
button
Temporary power button
- While the DVR is not recording, press this button to playback
recorded audio and video in reverse. Use the
wheel to control playback
speed and direction.
buttons
- While the DVR is playing, turn the
wheel clockwise or
counter-clockwise to increase the forward or reverse playback speed from 2 to 600
times normal speed. While the DVR is paused, turn the
wheel clockwise
or counter-clockwise to decrease the forward or reverse playback speed from
to
times normal speed.
- While the DVR is recording, playing, or paused, press this button to
stop the DVR. If no other buttons are pressed within 10 seconds, the DVR will
automatically start recording, if scheduled to do so. During the 10 seconds, press
the
or
buttons.
- While the ignition is switched off, press this button for
2 seconds to turn DVR power on. Power will automatically turn off if no buttons
are pressed for 5 minutes. During the Delay-On time after the ignition has been
switched on, press this button for 5 seconds to turn DVR power on and start
recording. During the Delay-Off time after the ignition has been switched off,
press this button for 5 seconds to stop recording and turn DVR power off.
SHUTTLE
JOG
SHUTTLE
SHUTTLE
MENU
,
SEARCH
,
PLAY
,
REV
.
PLAY
,
COPY
RECORD
SEARCH
button
Video output jack
- While the DVR is stopped, press this button to display a search
menu. You can search the recorded audio and video for a particular video
segment, alarm event, or date and time. Use the
wheel to page forward and
backward. Use the
and
to select an item from the list, then press the
button to play the selected video.
- Connect a video monitor to this jack during DVR programming
or playback. Only one video monitor can be connected to the DVR at a time. If a
video monitor is connected to a video output on the back of the DVR, it must be
disconnected before using the video output jack on the front of the DVR.
ñ
ò
ENTER
1
1
2
32
Operating the DVR