TR1-10 Basic Mobile DVR System
Quick Reference Guide
Information in this guide is subject to change without prior notice.
© 2004 Seon Design Inc.
www.seon.com
All rights reserved.
Document Part Number: 700-0028-01
Why isn't the DVR power light on?
Why doesn't the DVR start recording when I switch the ignition on?
Why does the DVR keep recording after I switch the ignition off?
What does the external alarm switch do?
Why doesn't the alarm light turn off?
Why is the buzzer sounding and how do I stop it?
Why won’t the
button respond when I press it?
Why won’t any of the DVR buttons respond when I press them?
How do I speed up or slow down the video playback speed?
Switch the ignition on. If the
power light is not on within 30 seconds, read
the troubleshooting section of the
.
The DVR may be programmed to start recording after a delay time (Delay-On), at
a specific time of day, or the disk-drive may be full.
The DVR may be programmed to keep recording for a period of time
after the ignition is switched off.
The
light may be programmed to stay on for a fixed length of time, until the
button is pressed, or until the ignition is switched off.
The buzzer may be programmed to sound if the external alarm switch is closed, if
the hard-drive is full, or if the video signal is lost. Press the
button on the
DVR to silence and disable the buzzer. Press the
button again to enable
the buzzer.
If the DVR is recording, press the
button and then press the
button
within 10 seconds.
The DVR buttons may be locked by a password . Read the
button description
for details.
Use the
wheel to change the video playback speed and direction. Read
the
wheel description for details.
DVR
(Delay-Off)
Closing the external alarm switch marks the current date and time as an important
event that can be easily located during video playback. It may also increase the
recorded video quality and recording speed for the duration of the alarm.
TR1-10 Installation and User's Guide
ALARM
STOP
BUZZER
BUZZER
STOP
MENU
LOCK
SHUTTLE
SHUTTLE
MENU
Programming the DVR
Frequently Asked Questions
To program the DVR, connect a video monitor to the jack on the front of the DVR. Press the
button and the
button within 10 seconds to display the Main Menu. Use the and
buttons to select menu items. Press the
button to display a selected sub-menu. Use the
and
buttons or the
wheel to change the value of a selected menu item. Press the
button to go back to a previous menu. From the Main Menu, press the
button to stop
programming and resume normal DVR operation.
Default values are shown below as [value].
STOP
MENU
ENTER
JOG
MENU
MENU
ñ
ò
ï
ð
Note:
Recording Quality
Recording
Speed (ips)
1
2
3
4
5
6
60
12
9
7
6
5
4.5
30
24
18
14
12
10
9
20
36
27
21
18
15
13.5
10
72
54
42
36
30
27
5
144
108
84
72
60
54
2
360
270
210
180
150
135
1.5
480
360
280
240
200
180
1
720
540
420
360
300
270
0.5
1440
1080
840
720
600
540
0.2
3600
2700
2100
1800
1500
1350
0.1
7200
5400
4200
3600
3000
2700
Estimated Recording Times in Hours with 40 GB Hard-Drive
Recording Quality
Recording
Speed (ips)
1
2
3
4
5
6
60
24
18
14
12
10
9
30
48
36
28
24
20
18
20
72
54
42
36
30
27
10
144
108
84
72
60
54
5
288
216
168
144
120
108
2
720
540
420
360
300
270
1.5
960
720
560
480
400
360
1
1440
1080
840
720
600
540
0.5
2880
2160
1680
1440
1200
1080
0.2
7200
5400
4200
3600
3000
2700
0.1
14400
10800
8400
7200
6000
5400
Estimated Recording Times in Hours with 80 GB Hard-Drive
Main Menu
Set Time/Date/Title
Set Time: hour:minute:second am/pm
Set Date: month/day/year
Auto Daylight Savings: [on]/off
Display Input Voltage: [on]/off
Title: maximum 28 characters (0-9, A-Z, blank space)
Display position: top/[bottom]
Record Mode/Schedule
Picture Quality: 1 to 6 (6 = highest quality) [4]
Repeat Record: [on]/off (on = overwrite the oldest image)
Record Audio 1: [on]/off
Record Audio 2: [on]/off
Delay-On Time: 0 to 60 minutes [30 seconds]
Delay-Off Time: 0 to 60 minutes [30 seconds]
Timers
Day: Sun to Sat, Weekend, Weekday, Daily
Start Time: hour:minute:second am/pm
Stop Time: hour:minute:second am/pm
Recording Speed: 0.1 to 60 images/second [10]
Recording Quality: 1 to 6 (6 = highest quality) [4]
Enable Timers: on/[off]
Record Speed: 0.1 to 60 images/second [10]
Timer: on/[off]
Alarm Recording
Alarm Operation: [on]/off
Recording Speed (during alarm): 0.1 to 60 images/second [30]
Recording Quality (during alarm): 1 to 6 (6 = highest quality) [4]
Alarm Duration Time: 5 seconds to 60 minutes or non-stop [30 sec]
Buzzer Enable: on/[off]
No
No
No
No
Password Enable: on/[off]
Alarm-In: on/[off]
Yes (erases all information on the hard-drive)
Yes (updates DVR system software from CF card)
Yes (sets all DVR options to default values)
Yes (erases all information on the CF card)
Password: 111111 to [888888]
Disk Full: on/[off]
Video Loss: on/[off]
System/Defaults
Alarm Buzzer
Format Disk
System Update
Load Defaults
Format CF Card
Password
