SEON Explorer MX-HD, Руководство пользователя

Страница: 36 / 70

vMax Web Remote Operation
3–2 700-0160 R003
3.2. Accessing vMax Web
When the MX-HD DVR is connected to the network, users can remotely access the
DVR over the web to view, playback, and archive video as well as configure the DVR.
To access vMax Web
1. On a PC with an Ethernet connection to the DVR, right click the Internet Explorer
8 or 9 icon and select Run as Administrator.
Windows may prompt for confirmation.
2. In the browser tray, confirm that Protected Mode is Off, as shown in Figure 3-1 .
3. In the browser’s URL field, enter the DVR IP address from the Network Settings
menu.
The default DVR IP address is http://169.254.1.1 , as described in the Explorer
MX-HD Installation and Configuration Guide 700-0159 .
CAUTION: System Access Restriction
DVR menu access is restricted to persons with system access permission. If
you require permission to access configuration settings, contact your system
administrator.
NOTE:
The default network settings allow for connection to a laptop computer for
configuration and usage of the DVR only. For remote network access, consult
with your IT staff or Seon Design to configure the DVR to be on the same sub
net as the laptop..
NOTE:
vMax Web is not compatible with 64-bit versions of Internet Explorer.
Internet Explorer should be set to default settings.
If firewall security, access restrictions, or custom IE settings are applied, they
may adversely affect vMax Web performance.
vMax Web is not compatible with browsers other than Internet Explorer.
CAUTION: System Access Restriction
It is assumed that archiving is performed by users with administration level
login permissions, and that the computer, network, and Internet Explorer 8
have been configured to enable archiving and downloading video files.
If you require permission to access computer, network, and Internet Explorer
8 configuration settings, contact your system administrator.
Figure 3-1 Internet Explorer Protected Mode: Off