
DS2 – Two-Camera Vehicle Event Recording System
DS2 Quick Installation and Setup Guide
Part #700-1078 R5
Step 6: Run/Connect Camera Cables
Warning
:
The “A” pillar (beside the windshield) may contain an air bag
. Do not attempt to run cables
down the “A” pillar unless you are sure you understand how the safety system may be affected.
Connect
CAM
from Camera 1 to the cable from Camera 2.
Connect
OBD
from Camera 1 to the
IPC
input on the Control Unit.
Step 7: Verify Operation
Turn on the vehicle ignition and ensure the red light on Camera 1 is illuminated, indicating the system has
power and is operational. If the red light does not come on, check the Power Harness connections.