v 1.91 280621
ID button on the immobilizer’s main unit
•
Press the ID button once – checking the number of programmed ID transmitters and
smartphones to the immobilizer main unit. The number of flashes of the LED indicates the
number of programmed devices.
•
2 presses of the ID hold – entering into the pairing mode of a new ID transmitter or
smartphone. If the new device is not programmed in, press the ID button 1 time to exit the
procedure.
•
4 presses of the ID hold – removing ALL paired ID transmitters and smartphones
from the main unit.
RHD cars
If, in the car in which you install the immobilizer, it is armed not when the driver's door is
opened, but when the passenger door is opened, you can "swap" the door in the software.
To do this, enter the program number for the particular car, then enter program number 11981.
The return to the standard door recognition occurs when the program number for the particular car is
set.
If the device was installed before 2020-11-04 and later updated, but the program number for
a particular car has not been re-set, the immobilizer will be armed when the right door is opened. To
"swap" the doors, set the program number for the selected car again.
