3.
Installation
Please read the instructions provided in this chapter thoroughly before installing the IS-IP200-
IRB.
3.1 Ceiling / Wall Mounting
The IS-IP200-IRB can be installed directly on a wall or ceiling with the integrated 2-axis
adjustable Bracket Mount. Please note that the wall or ceiling must have enough strength to
support the camera.
Follow the steps below to install the IS-IP200-IRB:
Step 1.
Unpack the IS-IP200-IRB package and take out the Camera.
Step 2.
Connect the power / Ethernet / alarm / audio wires from ceiling or wall to the
corresponding connectors of the camera’s All-in-one Cable.
Step 3.
Attach the camera to the ceiling
/ wall with the supplied self-
tapping screws.
Step 4.
Loosen the screw indicated in
the figure, and adjust the
camera to a desired position,
and tighten the screw to secure
the camera.
