Sentry BT150 Скачать руководство пользователя страница 4

 

FCC Statement: 

 

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules.  These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful interference to radio 

communications. 

However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or 

television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures: 

•   Reorient or relocate the receiving antenna. 

•   Increase the separation between the equipment and receiver. 

•  

Connect the equipment to an outlet on a circuit different from that to which the

 

receiver is connected. 

 

This device complies with part 15 of the FCC rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired operation. 

 

 

Note: Modifications to this product will void the user’s authority to operate this equipment.

 

 

Содержание BT150

Страница 1: ...apter 配对与连接 Pairing and Connection 1 使手机与耳机的距离保持在一米以内 越近越好 1 Keep the distance between the mobile phone and the headset within 1 m the closer the better 2 按住 键约 5 秒看到红蓝灯交替闪烁时松开 此时耳机已进入配对模式 2 Press and hold the key for about 5 seconds and then release it when the red and the blue lamps alternately blink At this time the headset has entered the paring mode 3 开启手机蓝牙功能 搜索蓝牙设备 选择 BT150 序号名即可配对连接 当连接成功后...

Страница 2: ...ing two 步骤一 先把第一部手机配对连接 Step I pair and connect the first mobile phone 1 蓝牙耳机关机状态下 长按多功能键约 5 秒钟 直到耳机指示灯出现红蓝灯交替快闪 时进入可配对状态 1 In the off state of the Bluetooth headset press and hold the multifunction key for about 5 seconds and enter into the pairing state when the red and blue headset indicating lamps alternately and quickly flash 2 打开手机 A 的蓝牙功能 搜索蓝牙找到 BT150 序号名进行配对后完成连接 2 Enable the Bluetooth fun...

Страница 3: ...e phone A 2 找到手机蓝牙菜单下 之前连接过的 BT150 序号名记录 重新点击连接 2 Find out the record of BT150 sequence name previously connected under the Bluetooth menu of the mobile phone and then click Connect again 3 至此手机 A 手机 B 同时连接上蓝牙耳机 3 At this point the mobile phone A and the mobile phone B are simultaneously connected to the Bluetooth headset ...

Страница 4: ... harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the rec...

Отзывы: