4
The alarm beeping is different for each zone, and at the same time the alarming zone LED is on.
For zone 1------- one 0.3s long beep
(repeat 5 times)
For zone 2------- two short beeps
(repeat 5 times)
For zone 3------- three short beeps
(repeat 5 times)
For zone 4------- four short beeps
(repeat 5 times)
Setting Zone 1 to Delay 7 seconds Before Alarming:
Power off the
SWPREC1
receiver. Press the "SET" key of the
SWPREC1
receiver and hold it on
then power on the
SWPREC1
, "didididi" is heard, then release the "SET" key, “dididi” is heard to
show the 7s delay setting is OK. When zone 1 trips, it will have a 7 second delay before it sounds
the beeper, however if a recovery signal is received from the beam sensor within 7 seconds the
beeper will not sound.
Deleting One Zone / All Zones:
Press the "SET" key of the
SWPREC1
receiver and hold it on up to 6 seconds, two short beeping
(bibi) will be heard, then release the "SET" key, the zone LED will be turned on one by one, then
all zone LEDs are turned on, 5 seconds for each zone, press the “SET” key to delete the zone
when its zone LED is on, (bibi) will be heard to show the relative zone has been cleared. When
all zone LEDs are on, press the “SET” key to delete all zones.
“TRBL” LED
When the
SWPREC1
receives “tamper open” report, “battery low” report, or it cannot receive
any information in 8 hours, the relative zone “trbl” LED will be on. Press “SET” key to see the
“trbl” details:
1.
For tamper open, the “trbl” LED flashing is -----------0.3s on / 0.3s off.
2.
For supervision fail, the “trbl” LED flashing is --------0.9s on / 0.9s off.
3.
For BAT LOW, the “trbl” LED will keep steady on for 3.6 seconds.
LIMITED WARRANTY
LIMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS
Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone
else that this product at the time of its sale by Manufacturer is free of defects in materials and
workmanship under normal and proper use for one (1) year from the purchase date.
Manufacturer's only obligation is to correct such defects by repair or replacement, at its option,
if within such one (1) year period the product is returned prepaid, with proof of purchase date,
and a description of the problem. This warrant excludes and there is disclaimed liability for labor
for removal of this product or reinstallation.
This warranty is voided if this product is installed
improperly or in an improper environment, overloaded, misused, opened, abused, or altered
in any manner, or is not used under normal operating conditions or not in accordance with
any labels or instructions. There are no other implied warranties of any kind, including
merchantability and fitness or a particular purpose
, but if any implied warranty is required by
the applicable jurisdiction, the duration of any such implied warrant, including merchantability
and fitness of or a particular purpose, is limited to one (1) year.
Manufacturer is not liable for
incidental, indirect, special, or consequential damages, including without limitation, damage
to, or loss of use of, any equipment, loss sales or profits or delay or failure to perform this
warranty obligation.
The remedies, provided therein are the exclusive remedies under this
warranty, whether based on contract, tort or otherwise.
