92-1/2" Untreated Plate
23-1/4"
92-1/2" Treated Plate
:
:
:
:
3.
Butt the above wall frame against the wall panel from Step 10. Do Not fasten the frames
together so that they can be separated later.
4.
Install a siding panel using 8d galvanized box nails spaced 8" apart. Do Not nail the long
edge that overlaps the siding on the adjoining panels so they can be separated. Install (1)
one more siding panel. The last panel will extend 3-1/2" past the wall frame.
5.
Separate the wall panels.
Step 11 Assemble 92-1/2" Long Back Wall
2.
Install pre-cut wall studs between the top and bottom plates over the 'X' marks. Use 16d
galvanized nails for the treated bottom plate and 16d coated sinker nails for the top plate.
1.
Cut (1) one treated 2x4-10' and (1) one untreated 2x4-10' to a length of 92-1/2". Position the
boards together and indicate with 'X' marks where the wall studs will be located.
92-1/2"
Wall Panel
116-1/2" Wall Panel
Do Not Nail Edge
23-1/4"
X
X
X
X
X
X
X
X
Treated Bottom Plate
Untreated Top Plate
92-1/2" Wall Plate
24"
23-1/4"
24"
:
